Global E-invoicing Market 2012-2016 New Market Research Report Published

TechNavio’s analysts forecast the Global E-invoicing market to grow at a CAGR of 24.2 percent over the period 2012-2016. One of the key factors contributing to this market growth is the need to automate invoicing process and reduce operational cost. The Global E-invoicing market has also been witnessing the increasing adoption of e-invoicing by SMEs. However, the complexity involved in electronic purchasing process could pose a challenge to the growth of this market.

To Buy The Copy Of This Report Visit: http://www.marketresearchreports.biz/analysis-details/global-e-invoicing-market-2012-2016

TechNavio’s report, the Global E-invoicing Market 2012-2016, has been prepared based on an in-depth market analysis with inputs from industry experts. The report covers the Americas, and the EMEA and APAC regions; it also covers the Global E-invoicing market landscape and its growth prospects in the coming years. The report also includes a discussion of the key vendors operating in this market.

Key vendors dominating this market space include Ariba Inc., Basware Corp., Esker SA, and IBM Corp.

Other vendors mentioned in the report: PricewaterhouseCoopers Inc., Billentis, Cegedim SA, Comarch SA, and Maventa Ltd.

To Read the Complete Report with TOC Visit: http://www.marketresearchreports.biz/analysis/165229

Key questions answered in this report:

• What will the market size be in 2016 and what will be the growth rate?
• What are key market trends?
• What is driving this market?
• What are the challenges to market growth?
• Who are the key vendors in this market space?
• What are the market opportunities and threats faced by key vendors?
• What are the strengths and weaknesses of each of these key vendors?

 

Related Report:

 

Polyvinyl Alcohol (PVA) Films Market – Global Industry Analysis, Market Size, Share, Trends, Analysis, Growth and Forecast, 2012 – 2018

 

Polyvinyl alcohol is popularly known for its film forming, adhesive, and emulsifying properties. It is resistant to solvents, grease, and oil. PVA films are primarily used as water soluble packaging materials for a broad variety of product types. PVA films facilitate water soluble packaging for products such as laundry detergents, industrial batch chemicals, water treatment chemicals, disinfectants, auto dish detergents, toilet blocks, and many more.

The advantage of using such packaging is that they provide ease of use for hazardous materials since most of the accidents in industries occur during the pouring stage. Thus, apart from using it as a packaging material, it is also used as a polarizer film. Such films are made using triacetyl cellulose films (TAC) and PVA, and are extensively used in liquid crystal display (LCD) panels.

For More Information Contact:

Hemendra Parmar

State Tower

90 State Street, Suite 700

Albany, NY 12207

United States

Tel: +1-518-618-1030

sales@marketResearchReports.biz

Website: http://www.marketresearchreports.biz/

Global and China Touch Screen (Panel) Marekt Report, 2012-2013

Global and China Touch Screen (Panel) Industry Report, 2012-2013 covers the followings: 

 

• Touch Screen Market Size
• Trends of Small, Medium and Large-sized Touch Screens
• Touch Screen Downstream Market and Industry
• 11 Small and Medium-sized Display Companies
• 18 Touch Screen Companies
• 4 Touch IC Companies and 5 Glass Companies

 

Touch screen market scaled approximately US$13.8 billion in 2012, an increase of 27.8% compared with US$10.8 billion in 2011, shipments grew by about 34.1%. It is expected that the market size in 2013 will climb 26.8% YoY to US$17.5 billion, with growth of 28.0% in shipments.

 

 

To Buy The Copy Of This Report Visit: http://www.marketresearchreports.biz/analysis-details/global-and-china-touch-screen-panel-industry-report-2012-2013

 

 

The future development direction of the mobile phone touch screen area is IN-CELL, which, once the yield problem is solved, will produce the lowest cost as well as the best performance. While Samsung insists on using AMOLED, ON-CELL will enjoy a long-term retention of place. Apple has pioneered the G/G-type touch screen with the best performance, but too thick, too heavy, too costly. In 2011, Samsung’s challenge to Apple was not so significant, G/G type became Apple’s favorite, and also the mainstream choice of high-end mobile phones. The abrupt rise of G/F/F in 2012 brought more ideal thickness, weight and cost than G/G type, yet the performance was not good enough. P/F type dominated the low-end since cost was the most important consideration. In 2012, G/F/F eroded part of the P/F market, P/G type suffered a fast fading due to poor weight and thickness as well as higher cost than P/F.

 

Entering 2013, with the high homogenization of smart phones, companies have concentrated on screen competition, resulting in the endless emergence of 1080P phones. A 5-inch phone screen’s resolution is even higher than 99% of 32-inch TV, the same as 90% of 60-inch TV, which reflects the public’s enthusiasm for screens. Even for cheap phones, only more costs are devoted to the screen can good results be achieved, the year 2013 will witness the rise of OGS full lamination. High- and medium-end phones, especially smart phones will resort to extensive use, and most companies don’t care about the shortcomings of insufficient structural strength. Nokia, Sony Mobile and HTC all use OGS in their high-end products, so do Mainland Chinese companies such as OPPO, Huawei, ZTE, Coolpad, Lenovo, K-TOUCH, Gionee, BBK, etc., accompanied by a speedy spread in the mid-market.

 

The cost advantage of G/F/F is not prominent, and users show unconcern about the shortcomings of insufficient structural strength, thus a large portion of G/F/F’s share in the high/medium-end market will be snatched by OGS. The future development of G1F depends on the price advantage, following the IC technological advances and lower prices, its cost advantage may even be greater than that of resistive screen.

 

The medium-sized field primarily refers to the 7-10 inch screen market. In 2011, iPad adopted G/G type touch screen, so did Amazon’s Kindle Fire; as the medium-sized G/G type touch screen capacity was basically undertaken by Apple, other vendors turned their attention to the G/F/F. In 2012, Japan-based Nissha Printing with the aid of Nitto Denko’s ultra-thin ITO film developed DITO type touch sensor. Considering the thin design and better performance than G/F/F, Apple employed GF2 in iPad Mini for the first time. The cost performance of 9.7-inch iPad launched in 2013 is obviously inferior to the upcoming iPad Retina Mini, the sales volume is expected to drop severely.

 

 

To Read the Complete Report with TOC Visit: http://www.marketresearchreports.biz/analysis/165068

 

 

GF2 will see a swelling proportion, however, due to the high cost, it is unlikely to be adopted by vendors other than Apple. Most of the vendors of non-Apple camp will choose G/F/F, and Amazon is also probably to turn to the G/F/F camp after abandoning the G/G type. OGS in 2014 is anticipated to have a high yield of about 90%, with competitive cost and adequate capacity, thus widely used in the non-Apple camp, followed by a further market expansion in 2015.

 

It is predicted that OGS will dominate the 11-inch above touch screen market, yet a few vendors prefer to the G/F/F design in view of cost factor. The bigger the screen, the more evident the competitiveness of OGS, because as screen increases, the resistance value accordingly presents an escalating trend, but in the case of large resistance, ITO film sensor exposes poor sensitivity and high degree of difficulty to produce the large-sized ones. Thickness and weight of G/F/F are also higher than those of OGS, 11.5-17 inch laptops are highly possible to select OGS.

.

.

 

 

 

Latest Reports:

 

Analysis of 138 Lithium-based Rechargeable Battery Manufacturers: Chemistry, Strategy, Success

 

 

This report concerns lithium-based rechargeable batteries. Predominantly, they are lithium-ion but we also cover alternatives usually with no intercalation and using lithium metal. All serious analysts predict that these will be responsible for the majority of expenditure on rechargeable batteries over the coming decade, notably in the lithium-ion form. It is therefore important for those making, designing in and using such batteries to understand the variations emerging and their potential for success or failure. Unfortunately, even comprehensive listings of manufacturers and intending manufacturers are hard to find. This report clarifies the situation, revealing the product chemistry, strategy and electric vehicle success of manufacturers and intending manufacturers.

 

For More Information Contact:

Hemendra Parmar

State Tower

90 State Street, Suite 700

Albany, NY 12207

United States

Tel: +1-518-618-1030

sales@marketResearchReports.biz

Website: http://www.marketresearchreports.biz/